IMPORTANT NOTE >> Installation into Stone Counter Tops
Please be reminded that the stainless steel grill surface will flex slightly when switched on.
This motion is intended and is counteracted by the bolts, which hold the unit in place.
If you plan to install the Cook-N-Dine teppanyaki grill into a stone counter-top, please talk to your supplier about your plans. Your stone professional will be able to advise you on any installation aspects to watch out for, e.g. on how much counter-top “meat” is needed at the narrowest point to accommodate and secure a Cook-N-Dine built-in teppanyaki cooktop unit properly.
It is common professional business practice to reinforce the narrow strips of material whenever a large cutout is made (e.g. for sinks, stoves, cooktops). This will support and strengthen those areas and prevent possible damage. Alternatively, your installer needs to consider using angle brackets around the perimeter of the cutout (approx. 2 inch x ½”) and fasten the unit through those brackets. That way any stress applied to the material will be evenly distributed.
Note: Make sure to have the unit and all install sheets on site for countertop templating.
Copyright ©2010 P&P Marketing, Inc.
All rights, errors and misprints reserved.
All logos and trademarks are the sole property of their respective owners.
Press articles are the property of the respective media, are strictly editorial and not paid advertising.
We are not responsible for any content or business offers from other websites we link to, the media or other websites which link to cookndine.com or ccok-n-dine-usa.com, or other websites displaying images of CND products or offer CND products for sale.
All graphics, photos and images are copyrighted material and may not be used or distributed, neither electronically nor in print,
without written consent of the respective copyright holder.
teppanyaki grill, teppan cart, tapan, teppan yaki, outdoor kitchen, design outdoor room, Japanese flat top griddle, tapan hot plate, stainless steel grill table, indoor grill, flameless contact grill, built-in cooktop, drop-in cook top, kitchen carts, CDS Design GmbH, Creativ Design Schacht, Joko Domus, Rieber, Tecta, Bauhaus furniture, cantilever chairs, modern classics, mid-century classic design, Solicut, Solingen chef knifes, Linden Sweden, kitchen utensils, spice grinder, Vic Firth, electric pepper mill, Cook-N-Dine International, Germany, German made
The True Revolution in Cooking & Dining
Safe - No open flame! All you need is a power outlet!
With the cookndine teppanyaki table grill you can do benihana Japanese style grilling hibachi stirfry cooking at your own home
Product Specifications TABLE + PORTABLE | BUILT-IN COOKTOP UNITS CLICK HERE
Material:
Professional Food Grade German Stainless Steel, best alloy
Type 304, 8-10 gauge (1/8" to 5/32" thick | 3-5 mm),
cold pressed and hand-welded, silk brushed finish
Electric: 115V , 50/60 Hz 230V|8AMP on request.
Rating: 1800 Watt, 15 AMP 3000 Watt upgrade available, 230V only
Usage: 1.8 kWh on 10 when fully loaded with food
Cable: included; regular grounded plug (3-prong)
Control:
1-10 temperature dial with thermostat and 2 control lights
Variable CONTACT heat up to 430º F (210º C)
Warranty on all Cook-N-Dine units:
5 years. Electrical and electronic parts: 1 year
Electrical and electronic
Components are UL approved.
TS-35 35-1/2", TS-43 43", TS-47 47" and TS-56 56" diameter
90 cm, 110 cm, 120 cm, 143 cm diameter
TS-35B | 35-1/2" diameter | height 42"
90 cm dia, 107 cm H
PU-23 | 23-5/8" diameter | 3-1/8" H 60 cm dia, 8 cm H
PU-27 | 27-1/2" diameter | 3-1/8" H 70 cm dia, 8 cm H
MO-60 | 23-5/8" diameter | 1-9/16" H
MO-70 | 27-9/16" diameter | 1-9/16" H
MO-51 | 20-1/16" x 14-15/16" x 1-9/16" H
MO-61 | 24" x 17-11/16" x 1-9/16" H
MO-80 | 31-1/2" x 23-5/8" x 1-9/16" H
MO-111 | 44" x 24" x 1-9/16" H
Available Sizes:
Steel Tables 30" H
Bar/Bistro-Table 42" high
Portable Teppanyaki
ULTRA-SLIM - only 1-9/16" H
1
2
3
4
5
6
7
8
9
10
11
2.1
2.2
2.3
2.4
TABLETOP/COOKING SURFACE
CONTROL BOX
HEATING ELEMENT
CONDUIT
HEATING ELEMENT ENCLOSURE
INSULATION RING
THREADED ROD WITH STOP NUT
TUBE / STAND
FOOT
STABILIZER BARS
ADJUSTMENT NUTS
POWER
CABLE
2.1 DIAL KNOB
2.2 CABLE OUTLET
2.3 WARM-UP LIGHT
2.4 OPERATING LIGHT
Since 1887
by
BUILT-IN COOKTOPS fig. 1-6 ONLY.
60 cm dia | 4 cm H
70 cm dia | 4 cm H
51 cm x 38 cm x 4 cm H
61 cm x 45 cm x 4 cm H
80 cm x 60 cm x 4 cm H
111,8 cm x 60,9 cm x 4 cm H
The patented Original by CDS, Germany
Questions? Call
(305) 754-3176
Mon - Fri 9-6 ET
Cook-N-Dine is a proud sponsor of TAC FL - Technical Aid Convoy Florida - First Response Unit in Catastrophic Events,
a non-profit 100% volunteer organization registered under the Florida Statutes of Law #N08000004824 www.tacfl.org
Exclusive Importer for
The Americas & Caribbean
Cook-N-Dine International, Inc.
P 305.754.3176 | F 305.754.3177
Miami | FL 33138 | USA
All CND teppanyaki grills feature a WARMING AREA of
~2-3 inch (4-8 cm) surrounding the
HOT Cooking Center
similar to the "wok" cooking principle.
MODELS + SIZES
built-in | drop-in
teppanyaki grills
click on .pdf line
to download file
RECTANGULAR
#MO-51: 20" L
#MO-61: 24" L
#MO-80: 31.5" L
DUAL-BURNER
#MO-111:
44" L x 24" W
ROUND
#MO-60: 23-5/8" Ø
#MO-70: 27-1/2" Ø
CONTROL BOX "B"
concealed mounting
inside the cabinet
Call us for list prices or a quote
on custom sizes.
You might also
be interested in freestanding stainless steel
the chic
for smaller spaces
or our versatile
for any flat surface
___________________
Flip through the
CND Teppanyaki Grill
